Super light acrylic water-based paste to be applied with a spatula, paintable to seal blanks. If you intend to laminate a blank in Eps, it is advisable to seal the blank from the small holes that are necessarily created when working with polystyrene. Using this product you will have smooth boards, easily paintable but especially during lamination your blank will absorb much less resin making your board much lighter and saving you money.
 Methods of application: The substrates to be treated must be healthy and clean, free from dust, grease and wax. Before application, mix the product with the spatula until it is pasty and homogeneous. If it is slightly dry, it is advisable to moisten the product with water and mix it again. Application with trowel or trowel. A lightweight filler ideal for filling small holes in white PU or EPS prior to lamination. Needs thorough drying before overcoating or lamination. Excellent on EPS. When it is dry, you can lightly sand with fine paper.
 The board is now ready to be painted or laminated.
 PRODUCT TO BE USED BY CAREFULLY FOLLOWING THE INSTRUCTIONS.
 INCORRECT USE CAN LEAD TO DELAMINATIONS